Piston cooling nozzle

Finished Weight of Component : 11g
Density (g/cm3) : >7.5gcm3
Tensile Strenght (N/mm2) :
Yield Strength (=0.2% N/mm2) :
Hardness :
Treatment :
Description: This MIM part is used in a V8-cylinder engine for piston cooling. It is assembled in the engine block in order to direct a defined oil jet stream onto the diameter of the piston bottom side. The tube is brazed into the appropriate bore after sintering. The small tolerances and required braze slot could only be economically realised by Metal Injection Moulding.