Reverse gear synchroniser (MIM)

Reverse Lever, Braking Disc, Pin (all MIM)

Finished Weight of Component :
Density (g/cm3) : 7.4g/cm3
Tensile Strenght (N/mm2) : 450 MPa
Yield Strength (=0.2% N/mm2) :
Hardness : 500 + 250 HV1
Treatment :
Description: All parts are made from Fe-Ni. Used in transmission systems, these three parts work in combination to help synchronise the reverse gear. These three metal injection moulded products are good examples of the adoption of this new technology by the automotive industry.