Carrier for Rifle

Finished Weight of Component : 21g (iron-7% nickel powder)
Density (g/cm3) : 7.70 g/cm3
Tensile Strenght (N/mm2) :
Yield Strength (=0.2% N/mm2) :
Hardness : HV700
Treatment : heat treated
Description: This MIM component is for use on a rifle, and is a new part to provide additional functions. The geometry of the part and of the mould employed in its production by MIM were generated by computer. At first, attempts were made to produce the carrier from sheet by cold forming but this was not successful.