 |
|
|
MAHLER-Sintering furnace with gas heated Fast Dewaxing Zone |
|
 Click on image to enlarge |
|
Belt width 600 mm, throughput 450 kg/h ceramic muffle,gas quench unit for sinter hardening applications, tempering furnace protective gas flow regulation within the furnace. ENDOGAS and N2/H2-Atmosphere |
|
 |
|
|
MAHLER-Sintering furnace |
|
 Click on image to enlarge |
|
Belt width 600 mm, throughput 600 kg/h Conventional dewaxing Zone, ceramic muffle in the sintering zone ENDOGAS and N2/H2-Atmosphere |
|
|
|
|
MAHLER-Sintering furnace, gas heated with ceramic radiant tubes |
|
 Click on image to enlarge |
|
Belt width 600 mm, throughput 450 kg/h ceramic muffle, gas quench unit for sinter hardening applications, protective gas flow regulation within the furnace. ENDOGAS |
|
|
|
|
In the gas quench zone the P/M parts are hardened in the cooled protective atmosphere flow. For this a certain quantity of the protective atmosphere is recirculated Through a gas-tight blower the cold protective atmosphere is compressed and blown on the parts. The cold protective atmosphere flows around the hot parts with a high speed and achieves a high cooling speed of up to 8°C/sec in the parts (depending on parts). A heat exchanger mounted underneath the conveyor belt cools again the heated gas Additional devices grant the optimal flow, achieving an even distribution of the gas over the whole width of the belt
|
|
| Contact Details | |
MAHLER GmbH |
