European Powder Metallurgy Association (EPMA) - World PM2016 Congress Proceedings

€25.00

High-performance Titanium Alloys With Wrought-like Microstructures And Mechanical Properties Produced By Hydrogen Sintering And Phase Transformation (HSPT)

James Paramore, Zak Fang, Brady Butler, Matthew Dunsten

Format: PDF Download

View Details

€25.00

Nanostructuring Of Surfaces Of Porous Materials Made Of Sponge Titanium Powder By Means Of Anodic Oxidation

Vadim Savich

Format: PDF Download

View Details

€25.00

Methods Of Micro- And Macrostructure Regulation, Structural Properties Of Sintered Porous Materials From Spongy Titanium Powders

Vadim Savich

Format: PDF Download

View Details

€25.00

Fe-, And Ni-based MMCs With Fused Tungstencarbide Particle Inclusions By Hot Extrusion

Christian Edtmaier

Format: PDF Download

View Details

€25.00

Economical Processing Route Of ODS Material By Controlled Surface Oxidation Of Fe 9Cr Powder

Juha Lagerbom, Tomi Lindroos, Pertti Lintunen, Jouko Virta, Maria Oksa, Jarkko Metsäjoki, Mykola Ivanchenko

Format: PDF Download

View Details

€25.00

Effect Of Ta, Nb Content And Sintering Temperature On The Microstructure, Mechanical Properties And Sinterability Of Ti-Nb-Ta Alloys

Joan Lario, Angélica Amigó, Vicente Amigó

Format: PDF Download

View Details

$Refractory Metal Based Materials For Applications At High Temperatures$

€25.00

Refractory Metal Based Materials For Applications At High Temperatures

Thomas Weißgärber, Uwe Gaitzsch, Bernd Kieback

Format: PDF Download

View Details

€25.00

Studies Of Oxide Reduction During Sintering Of Cr Alloyed PM Steel By Coupled Experimental And Diffusion Simulations

Karin Frisk, Hans Magnusson, Dimitris Chasoglou, Ola Bergman

Format: PDF Download

View Details

€25.00

Effect Of Active Constituents In The Atmosphere On The Sintering Of Chromium-alloyed PM Steels

Seshendra Karamchedu, Eduard Hryha, Lars Nyborg

Format: PDF Download

View Details

€25.00

Enhanced Control Of Dimensional Change And Mechanical Properties Of Fe-Cu-C PM Steels Under Optimized Sintering Cycle

Shandra Sainz, Cristina Bilbao, Angela Veiga, Francisco Castro

Format: PDF Download

View Details

€25.00

Vacuum Sintering Studies On Chromium Alloyed PM Steels

Maheswaran Vattur Sundaram, Seshendra Karamchedu, Clément Gouhier, Eduard Hryha, Lars Nyborg

Format: PDF Download

View Details

€25.00

New Design Alloys Suitable For Sinter-Brazing For Low Alloyed PM Steels

Andrea Galán Salazar, Mónica Campos Gómez, José Manuel Torralba Castello, Lisa Kjellén, Owe Mårs

Format: PDF Download

View Details

€25.00

Additive Manufacturing Of Inconel 625 Superalloy Produced By Electron Beam Melting.

Edouard Chauvet, Martin Guilhem, Jean-Jacques Blandin, Remy Dendievel, Benjamin Vayre, Stéphane Abed

Format: PDF Download

View Details

€25.00

Characterisation Of EBM-built Shelled Samples Of Ti6Al4V Compacted By HIP

Karin Frisk, Lars-Erik Rännar, Andrey Koptyug, Niklas Petterson, Daniel Persson, Alexander Leicht, Maheswaran Vattur Sundaram, Eduard Hryha

Format: PDF Download

View Details

€25.00

Effect Of Thermal Treatment Conditions In Mechanical Properties Of Ti6Al4V Parts Manufactured By Selective Laser Melting

Ane Miren Mancisidor, Pedro Álvarez, Fermin Garciandia

Format: PDF Download

View Details

€25.00

Instabilities And Ablation Under Laser Melting Of Powder Layers

Yuri Chivel

Format: PDF Download

View Details

€25.00

Phase Transformation Under Isostatic Pressure In HIP

Alexander Angré, Magnus Ahlfors, Dimitris Chasoglou, Linn Larsson, Erik Claesson, Oskar Karlsson

Format: PDF Download

View Details

€25.00

Improved Corrosion Properties With PM HIP For Duplex Safurex®UXM? Developed For Urea Manufacturing -- Called: Safurex®UXM°

Tomas Berglund, Martin Östlund, Alex Scheerder

Format: PDF Download

View Details

€25.00

Rapid High Pressure Gas Quenching During HIP: Combining Densification And Heat Treatment Into A Single Process

Stephen Mashl, Anders Eklund, Magnus Ahlfors

Format: PDF Download

View Details

€25.00

Numerical Simulation Of A Tool Steel HIP Cladding Layer

Sebastian Riehm, Chung Van Nguyen, Marko Hajeck, Anke Kaletsch, Christoph Broeckmann, Anna Klara Weddeling, Werner Theisen

Format: PDF Download

View Details

€25.00

Hot Forging Hypoeutectic Powder White Cast Iron In The Presence Of Liquid Phase

Vladimir Dorofeyev, Yury Dorofeyev, Alexander Babets, Tatyana Goncharova, Roman Vodolazhenko

Format: PDF Download

View Details

€25.00

Effect Of The Heat Treatment On The Microstructure, Boron Distribution And Flow Stress Of The Ni-based Superalloy PM HIP Compact Under High Temperature Compression Tests

Andrei Shulga

Format: PDF Download

View Details

€25.00

In-Situ Bending During Sintering Of Compacted Beams From Prealloyed CuSn-Pb: Computer Simulation Vs. Experiment

Maziyar Azadbeh, Mehrdad Mousapour, Herbert Danninger, Rozita Rouzegar

Format: PDF Download

View Details

€25.00

Hot-embossing Micro Parts Made Of Aluminium And Aluminium Reinforced With Carbon Nanotube: Feedstock Preparation And Shaping

Omid Emadinia, Elsa Wellenkamp Sequeiros, Manuel Fernando Vieira, Maria Teresa Vieira

Format: PDF Download

View Details

all
Additive Manufacturing: AM - Properties of Lightweight Materials
Additive Manufacturing: AM - Powder Bed Based Technologies
Additive Manufacturing: AM - Powder Recycling and Aging
Additive Manufacturing: AM - Powder Characteristics
Additive Manufacturing: AM - Special Aspects in AM Technology
Additive Manufacturing: AM - Special Powder and Materials
Additive Manufacturing: AM - Special Aspects in AM Powders
Additive Manufacturing: AM - Properties of High Performing Alloys
Additive Manufacturing: AM - Deposition Technologies
Additive Manufacturing: AM - Properties of Stainless Steels
Additive Manufacturing: Global Progress of Metal Additive Manufacturing
Core PM: Gas Atomisation
Core PM: Powder Characterisation
Core PM: Compaction Simulation
Core PM: Shaping
Core PM: Sintering Simulation
Core PM: Dimensional Control in Sintering
Core PM: Liquid Phases in Sintering
Core PM: Improvements in Sintering
Core PM: Sintering Atmospheres
Core PM: Spark Plasma Sintering
Core PM: Secondary Operations
Core PM: Quality Inspection
Core PM: Machining
Hardmetals, Hard Materials and Cermets: Processing
Hardmetals, Hard Materials and Cermets: Modelling
Hardmetals, Hard Materials and Cermets: Characterisations and Properties
Hardmetals, Hard Materials and Cermets: Cermets
Hardmetals, Hard Materials and Cermets: Alternative Binders
Hardmetals, Hard Materials and Cermets: Coating
Hardmetals, Hard Materials and Cermets: Applications
Hot Isostatic Pressing: HIP - Production
Hot Isostatic Pressing: HIP - Process
Hot Isostatic Pressing: HIP - Properties
New Materials and Applications: Transportation Applications
New Materials and Applications: Foams
New Materials and Applications: Refractory Materials
New Materials and Applications: PM Lightweight Materials
New Materials and Applications: Lightweight MMCs
New Materials and Applications: Magnetic Materials
New Materials and Applications: Functional Materials
New Materials and Applications: Biomedical Applications
New Materials and Applications: Iron Based MMCs
New Materials and Applications: High Entropy Materials
New Materials and Applications: New Materials and Applications
Powder Injection Moulding: MIM Quality Improvement
Powder Injection Moulding: MIM High Temperature Materials
Powder Injection Moulding: MIM Titanium
Powder Injection Moulding: MIM Titanium and Other Advanced Materials
Powder Injection Moulding: MIM Materials for Special Applications
Powder Injection Moulding: MIM Iron and Steel
Powder Injection Moulding: Advanced Materials and Processes
PM Structural Parts: Powder Pressing
PM Structural Parts: Steel Sintering
PM Structural Parts: Fatigue
PM Structural Parts: Heat Treatment
PM Structural Parts: Stainless Steels
PM Structural Parts: Low Alloy Steels
PM Structural Parts: Structural Parts
PM Structural Parts: PM Gears

World PM2016 Congress Proceedings

Filters