Subscribe to the EPMA Mailing List

Euro PM2011 Proceedings: PM Tool Materials

  • : EPMA
  • : EPMA
  • : PDF Download
  • : 2011

Euro PM2011 Congress Technical Presentations on PM Tool Materials.

This download contains the following papers:

Ti(C,N)-Based Cermets: Evolution and Stability of Microstructure Within Sintering and High-Temperature/High-Pressure Annealing
S. Wawrzik, A. Demoly, C. Veitsch, W. Lengauer

TiCN-WC-Cr-Ni Based Cermets Produced by Liquid Phase Sintering for Hot Rolling Applications
I. Iparraguirre, M. Aristizabal, N. Rodriguez, F. Ibarreta, R. Martinez and J.M. Sanchez

Microstructural Analysis of an Iron-Based Cermet Reinforced with TiCN
P. Alvaredo, E. Gordo

Spark Plasma Sintering of Mechanically Milled Hot Work Tool Steel Powder
Fedrizzi A, Pellizzari M. Zadra M.

Microstructure and Fracture Toughness of Cermets Produced by Mechanical Alloyed Powders
Hiroyuki Hosokawa, Kiyotaka Kato, Koji Shimojima and Akihiro Matsumoto

Fabrication of Composite Structural Material of Cemented Carbides and Cermets
Tomoyuki Ishida, Hideki Moriguchi, Akihiko Ikegaya

Consolidation of Ceramic Composite Materials in the TiN-TiB2 System
V.Rumyantsev, N. Kovelenov, N.Korableva, O.Bulatov, S.Ordanyan

Influence of TiC and TiCN on the Phase–Structure Formation Physicomechanical Properties and Wear Resistance of Cr3C2-Based Hard Alloys
V. A. Maslyuk

Reactive Sintering of Fe – Co - B Cermets
J. Nowacki

Fabrication and Mechanical Properties of Wet Milled TiC-FeAl Alloys

Examination of Fracture and Deformation Mechanisms in WC/Co Hardmetals
M G Gee, K P Mingard, B Roebuck, J W Nunn and H Jones

Fatigue Crack Propagation in WC-Co Hardmetals
S.Keusemann, C.Broeckmann, M. Magin

Effect of Crystal Anisotropy on the Mechanical Properties of WC Embedded in WC-Co Cemented Carbides
N. Cuadrado, D. Casellas, L. Llanes, I. Gonzalez, J. Caro1

Dry Cutting Diamond Impregnated Tools Based on Water Atomized Powders
Iturriza, I; Peña, G; Luno-Bilbao, C; Mancisidor, A; Sarasola, M

Hardmetal Products Made from Pre-alloyed Binder
Mike Carpenter

Nano/Micro Indentation of Cemented Carbides
Annamária Duszová, Peter Horňák, Pavol Hvizdoš, František Lofaj, Ján Dusza

Characterization of Diamond Impregnated B4C / Fe-Co MMC
Kerim Emre Öksüz, Mehmet Şimşir, Yusuf Şahin

The Influence and the Effectivity of VC and Cr3C2 Grain Growth In-hibitors on Sintering of Binderless Nanocrystalline Tungsten Car-bide Powders
Johannes Poetschke, Volkmar Richter, Roland Holke

Evaluation of Stress and Strain Fields in the Matrix Around Loaded Diamond Particle in Diamond Impregnated Tools
Andrzej Romanski, Janusz Konstanty

Crystal Orientation Determination of Monocrystalline Diamond Grains for Tool Application with Electron Backscatter Diffraction (EBSD)
W. Tillmann, D. Biermann, M. Ferreira, C. Rautert, N. Raabe, H. Trautmann

Cutting Efficiency of Circular Diamond Blade
G. Gelfusa, S. Turchetta

High Temperature Corrosion of Hardmetals
Tim Gestrich, Klaus Jaenicke-Roessler, Mathias Herrmann

Go To Top