Subscribe to the EPMA Mailing List

World PM2010 Proceedings: Powder Injection Moulding

pm2010-pim
  • : EPMA
  • : EPMA
  • : PDF Download
  • : 2010
Free

World PM2010 Congress Technical Presentations on Powder Injection Moulding.

This download contains the following papers:

Market and Technology for Titanium Metal Powder Injection Moulding
Randall M. German

Benefits of Supercritical CO2 Debinding for Titanium Powder Injection Moulding?
Yannig Thomas and Eric Baril

Substantial Improvement of Fatigue Behaviour of Ti-6Al-4V Alloy Processed by MIM DUDsing Boron
Microalloying, O.M. Ferri, T. Ebel, R. Bormann

Effect of Neodymium Addition on Microstructure and Mechanical Properties of MIM Titanium
Hao He, Yimin Li, Liang xiong, Jing Zeng

Contribution to the Development of 18 Carat Gold Alloy Shaped by MIM
MULIN Hubert, JACQUET Philippe, LAMBERTIN Michel, MOINARD-CHECOT Delphine, BIHR Jean-Claude

Effect of Powder Loading on Rheology and Dimensional Variability of Porous, Pseudo-Elastic NiTi Alloy Produced by Metal Injection Moulding (MIM) Using a Partly Water Soluble Binder System
Muhammad Hussain Ismail, Alfred T. Sidambe, Ignacio A. Figueroa, Hywel A. Davies and Iain Todd

Mechanical Properties of Powder Injection Moulded 17-4 PH Sintered in Dissociated Ammonia
Po-Han Chen and Kuen-Shyang Hwang

Influence of Chromium and Vanadium Carbides Reinforcement on the Sintering Process of M2 HSS Processing by MIM
G. Herranz, G. Rodríguez, R. Alonso

The Influence of Powder Size on Processing and Properties of MIM 17-4PH
Keith Murray, Andrew J. Coleman, Toby A. Tingskog & Donald T.Whychell Sr

Electroforming of Fe-Ni Alloy Micro Mould for Powder Injection Molding
Seong Ho Son, Wonsik Lee and Sung Cheol Park

MIM Superalloys for Automotive Applications
Andreas Kern, Martin Blömacher, Johan ter Maat, Arnd Thom

High Temperature and Fatigue Properties of Injection Moulded Superalloy Compacts
Hideshi Miura, Hikaru Ikeda, Takanori Iwahashi, and Toshiko Osada

Metal Injection Moulding Process for Copper / Diamond Composites with High Thermal Conductivity by Using Nanopowder
Kazuaki Nishiyabu, Yasuhiro Kanoko, Daiki Tanabe and Shigeo Tanaka

Development of a New Generation of Tungsten-Copper Composite Powder for MIM
H. Senillou, A. Nouveau, J.-F. Lartigue

High-Temperature Properties of MIM-Processed Superalloys
Burghardt Klöden, Ulrike Jehring, Thomas Weißgärber, Bernd Kieback, Ingolf Langer, Ralf W.-E. Stein

Parallel Analysis of Axial Pressing, Casting and PIM as Routes for Production of Alnico8
B. S. Zlatkov, J. ter Maat, M.V. Nikolic, U. Bavdek, C.Gierl, H. Danninger, O.S.Aleksic

Net-Shape Al6061/SiC Nanocomposites by Powder Injection Moulding
M. Rodríguez-Arbaizar, H. Hamdan, M.Leparoux, L. Kollo, H. Kwon, E. Carreño-Morelli

Effect Of Delay Time On Material Distribution Of Metal Co-injection Moulding
Yimin Li, Hao He, Guangyao Wang, Zhongyong Deng

Fraunhofer IKTS Activities in Two-Component Powder Injection Moulding
Tassilo Moritz, Anne Mannschatz, Andreas Baumann, Anja Kucera, Reinhard Lenk

Influence of a Mismatch in Shrinkage for Two-Component Metal Injection Moulding (2C-MIM)
Mulser, M.; Benedet Dutra, G.; Rager, J. ; Petzoldt, F.

Progress of Two-Component Micro Powder Injection Moulding (2C-MicroPIM)
Andreas Ruh, Volker Piotter, Klaus Plewa, Hans-Joachim Ritzhaupt-Kleissl, Jürgen Haußelt

Sintering of Nanostructured WC-10Co/316L Stainless-Steel Composite Parts Made by Assembling of the PIM
Parts, A. Simchi and F. Petzoldt, T. Hartwig, G. Veltl

Rheological Behaviour of Powder Injection Moulding (Pim) Feedstocks Fabricated with a Thermoplastic Binder System Based on Polysaccharides
J. Hidalgo, J.M. Contreras, S. González, A. Jiménez-Morales, J.M. Torralba

Wall-slip Velocity As A Quantitative Measure Of Powder-Binder Separation During Powder Injection Moulding
Berenika Hausnerova, Lucie Marcanikova, Petr Filip, Petr Saha

Rheological Characterization of Powder and Micro-Powder Injection Moulding Feedstocks
D. Checot-Moinard, C. Rigollet, P. Lourdin

Development of Molybdenum Powder Injection Moulding Feedstock
Jiupeng Song, Tao Shi, Yang Yu, Zhigang Zhuang

Water Solvent Debinding For PIM Parts
S.Roberjot, D.Auzene, L Iordache, JM Popot, T boulanger, E.Beekman, C.Emmerechts, D.Monnoye, U.Baraldi

Rheological And Thermal Behavior Of Powder Injection Moulding (PIM) Feedstocks Fabricated With Binder Systems Based On Waxes
J. Hidalgo, J.M. Contreras, B. Baile, A. Jiménez-Morales and José M. Torralba

Defect Formation And Its Relevance To Binder Content And Binder Redistribution Dring Thermal Debinding Of PIM Compacts
Yang-Liang Fan and Kuen-Shyang Hwang

Metal Injection Moulding Of Iron Based Syntactic Foams
Natalie Salk, Jörg Weise, Mohamed Bayoumi, Gabriel Bertrame Derner Silva

Feedthrough Hearing Implants
Slobodan Ilic, Steven Kennedy

The CIM Process Applied to Aesthetical Zirconia Ceramics
Johan ter Maat, Martin Blömacher, Andreas Kern, Arnd Thom

Processing of Yttria Stabilized Zirconia / Tungsten Carbide Composites by Ceramic Injection Molding
N. Ünal, F. Kern, M.L. Öveçoglu, R. Gadow

Sintered Strontium Hexaferrite Shaped by Injection Moulding in Unidirectional Magnetic and Electromagnetic Field
B.S.Zlatkov, M.V.Nikolic, H.Danninger, O.S.Aleksić, E.Halwax, W. Roth, L.S.Lukić

Fabrication of Glass Components by Powder Injection Moulding (PIM) Recycling Glass Waster
J. Hidalgo, J.M. Contreras, D. Berzal, A. Jiménez-Morales, J.M. Torralba

Simulation Tool for Powder Injection Molding and Its Applications
Seong-Taek Chung, Seokyoung Ahn, Seong Jin Park, and Randall M. German

Finite Element Simulations of the Sintering Processes for Alumina Powder Injection Moulded HIP Implants
J. Song, X. Kong, T. Barriere, B. Liu, J.C. Gelin

Numerical and Experimental Investigation of Backbone Binder Removal from MIM Copper Compacts
Ijaz Ul Mohsin, Daniel Lager, Wolfgang Hohenauer, Christian Gierl, Herbert Danninger

Micro-PIM Process with 316L Stainless Steel Feedstock and Numerical Simulations of the Sintering Stage
X. Kong, T. Barriere, J.C. Gelin

Simulation of the Interdiffusion at the Interface of Co-Sintered Parts
Benedet Dutra, G., Mulser, M., Petzoldt F.

Go To Top