Subscribe to the EPMA Mailing List

World PM2010 Proceedings: Powder Manufacturing and Processing

  • : EPMA
  • : EPMA
  • : PDF Download
  • : 2010

World PM2010 Congress Technical Presentations on Powder Manufacturing and Processing.

This download contains the following papers:

Structural and Chemical Characterizations of ODS Ferritic Steels Produced by Mechanical Alloying and Extrusion
P. Olier, J Malaplate, M.H. Mathon, Z. Oksiuta, D. Hamon, N. Baluc, Y. de Carlan

Structural and Magnetic Properties of Nanocrystalline Cu-Fe-Co-Al2O3 Composite Powders Processed by Mechanical Alloying
N. Llorca Isern, C. Artieda Guzmán, N. Porras-Mateu, A. Roca

Hydrogen Desorption Properties of MgH2-5at% TiCr1.2Fe0.6 Nanocomposite Synthesized by High-energy Mechanical Alloying
N. Mahmoudi, A. Simchi, A. Kaflou

Mechanosynthesis of CaxLa1-xMnO3 (0<x<0.7, ∆x=0.1) Perovskites: Crystal Structure And Mixed Ionic-Electronic Conductivity
A.M. Bolarín-Miró, C.A. Cortés-Escobedo, I. A. Lira-Hernández, A. Barba-Pingarrón, F. Sánchez-De Jesús

Nanocomposite SHS Powders Produced Using Mechanocomposite-Precursors
A. Ilyuschenko, T. Talako, A. Letsko, T. Grigorieva, N. Lyakhov, A. Barinova, M. Yakovleva

Characterization, Formation Mechanism and Mechanical Properties of Nanocrystalline W-Al alloy Prepared by Mechanical Alloying
Saeed Khademzadeh, Nader Parvin, Mahdi Rafiei

Soft Magnetic Cu-Co-Ni Composite Materials Produced by Mechanical Alloying
Cold Compaction, and Sintering, M. López, V. Núñez, R. Koduri, M.E. Gómez, J. Jiménez, D. Reyes

An Investigation on the High-Energy Ball Milling of Iron-Titanium Powder Mixtures without Process Control Agents
Ricardo Mendes Leal Neto; Railson Bolsoni Falcão; Edgar Djalma Campos Carneiro Dammann; Cláudio José da Rocha

Influence of the Filling Factor on the Obtaining of the Ni3Fe Intermetallic Compound by Mechanical Alloying
F. Popa, C. Voicu, C. V. Prică, I. Chicinaş

The Effect of Mechanical Activation and Mixing Procedures of Elemental Powders on Combustion Synthesis of NbAl3
C. J. Rocha; R. M. Leal Neto

Structure and Properties of a Biomedical Co-Cr-Mo-C Alloy Produced by Mechanical Alloying
F. Sánchez-De Jesús, J.A Betancourt, G. Torres-Villaseñor, A.M. Bolarín-Mir

Atomized Low Apparent Density (AD) Iron Powder For Advanced PM Applications
Peter Sokolowski and Francis Hanejko

New Iron Powder for Low Density Applications
François Chagnon

Effect of Melt Composition and Operational Parameters on Powder Characteristics after Water Atomization
M. Pasupathy, J.M. Martín, I. Iturriza, and F. Castro

Surface Analysis of Prealloyed Steel Powders: Qualitative and Quantitative Aspects
E. Hryha, L. Nyborg, C. Gierl , H. Danninger, S. Bengtsson

Innovative Ultra Rapid Cooling and Atomizing Process Utilizing Vapor Explosion and Production of New Functional Powders
Masahiro Furuya and Takahiro Arai

Background Studies and Implementation of Iron Powder Production from Blue Dust
Dr. Dmytro Fedorov

Production of Sponge Iron Powder by Reduction of a By-product of the Steelmaking Industry
M.I. Martín, F.A. López, M.E. Rabanal and J.M. Torralba

Testing of Powders for Sensitivity to Air Effect Segregation
RJ Farnish, P Kulkarni, RJ Berry, MSA Bradley, V Guillebert

Oxide Distribution in Prealloyed Water Atomized Steel Powder
D.Chasoglou, E.Hryha, L. Nyborg

Key Titanium Powder Characteristics Manufactured Using the Hydride-Dehydride (HDH) Process
Dr Colin G. McCracken, Daniel P. Barbis and Ronald C. Deeter

Advanced Screening to Produce High Performance Powder Metals
Greg Riter

Guidelines for Optimal Selection of Graphite Type for PM Parts Production
Luigi Alzati, Dr. Raffaele Gilardi, Dr. Simone Zürcher, Giovanni Pozzi, Stefano Fontana

Porous Structure Characterization of HDH Titanium Powder Sintered in Different Atmospheres for Biomaterial Applications
L. Barbosa, L. Salgado

Study of Influence of the Alloying Elements in the Final Properties of β-Ti Alloys Obtained by PM
F. Devesa, E. Benavente, Y.Torres, V. Amigó

Synthesis of Alumina Nanoparticles by Heat Treatment of Thermal Decomposed Aluminium Sulfate Aerosol Droplets
Burcak Ebin, Sebahattin Gurmen

Effect of Electrolysis Parameters on the Morphology and Chemical Composition of Electrolytic Cu-Zn Alloy Powders
Gökçe Hapçı, Gökhan Orhan

Microstructure Characterisation and Magnetic Properties of Nanocrystalline Cu-Fe-Co-Al2O3 Composite Powders Processed by Mechanical Alloying
N. Llorca Isern, N. Porras-Mateu, C. Artieda Guzmán, A. Escobar-Romero, D.Viladot-Gatnau

W and WC Powder Prepared from Different Sieved Fractions of WO3
Zbyněk Polák, Jiří Šulc

Possible Applications of Self-Decomposing iIntermetallic Fe-Al Type Powders in the Form of HVOF and D-Gun Spraying Protective Coatings
C. Senderowski, T. Durejko, Z. Bojar

Composition Changes of Cast Iron Particles Due to Surface Reactions in a Plasma Stream
K. Voleník, O. Schneeweiss, T. Chraska, B. Kolman, P. Chráska

High Speed Imaging Techniques for the Analysis of Close-Coupled Gas Atomisation
A.M. Mullis, I.N. McCarthy & R.F. Cochrane

Influence of Gas Density on the Atomisation of Melts
John J Dunkley, Dirk Aderhold

Spray Angle and Particle Size in the Pressure Gas Atomization of Tin and Tin-Copper Alloys
L. Achelis, K. Sulatycki, V. Uhlenwinkel, L. Mädler

Nitriding of Metal Powder
Stephanie Egger, Harald Leitner, Harald Raupenstrauch

Nano-Sized and Sub-Micron Carbide Powders for Thermal Spraying
U.Kanerva, J. Oksanen, T. Suhonen, T. Varis, X.W. Liu, Y. Ge, T. Ritvonen, O.Söderberg, E. Turunen, S-P. Hannula

Gas Atomization of NiCrBSi Powders
I.M. Kuşoğlu, I. Akpinar , B. Bülbül

Optimization for the Size and Shape of Chambers for the Production of Powders and Granules by Centrifugal Atomization
Sheikhali M. Sheikhaliev, John J. Dunkley

Go To Top