World PM2010 Congress Technical Presentations on Sintered Steels.
This download contains the following papers:
Analysis and Durability Test of Surface Rolled 1P1S 1.5Cr-0.2Mo Very High Density Gear
Teruie TAKEMASU, Takao KOIDE, Yoshinobu TAKEDA, Senad DIZDAR, Toshinaka SHINBUTSU
PM Gear Testing
Fritz Klocke, Christof Gorgels, Eva Gräser, Philipp Kauffmann, Timo Zundel, Gerd Kotthoff, Frank Wattenberg
Surface Modification of PM Gearlever
Sophie Caddeo Johansson, Karin Frisk, Åsa Gustafson, Leif Malmberg, Sven Bengtsson, Lars Nyborg
Modelling and Prediction of Fatigue Properties of Tool Steels Based on Defects, Geometry and Surface Condition
Sven Haglund,Odd Sandberg, Jens Grønbæk,
Fatigue Assessment of Laserbeam Welded PM Steel Components by the Notch Stress Approach
J. Baumgartner, R. Waterkotte, C. M. Sonsino
Relevance of Highly Stressed Volume for the Fatigue Design of Sin-tered Components
K. Lipp, P. Beiss, D. Hofferberth, A. Zafari
Reliable Component Fatigue Design Applying Appropriate Cyclic Properties
D. Amos, P. Delarbre, K. Lipp, H. Kaufmann
Austenitic Stainless Steels with Enhanced Mechanical Strength
Prasan Samal and Joseph Pannell, Ulf Engstrom, and Owe Mars
New Material Concept for Advanced Powder Forged Connecting Rods
Ian W. Donaldson, Timothy E. Geiman, Raymond K. Williams and Brandon A. Nichols
Effect of the Microstructure on the Fatigue Strength of Highly Densified Sintered Steel
Nobuhiko Matsumoto, Toshitake Miyake, Mikio Kondoh and Kimihiko And
Sintered Steels Prealloyed with Manganese – Chances and Risks
H.Danninger, M.Jaliliziyaeian, C.Gierl, E.Hryha, S.Bengtsson
Fatigue Behaviour of Fe-Cu-C Sintered Steels as a Function of Stress Concentration and Alloying Contents
A. Zafari, P. Beiss, C. Broeckmann
Cyclic Material Behaviour of a 4%Ni Diffusion-Alloyed and a 1.5%Mo Prealloyed Sintered Steel
R. Wagener, K. Lipp, H. Kaufmann
Effect of Microstructure on the Rolling Contact Fatigue Strength of 4600 Steel P/M Compacts
Terukazu Tokuoka, Yoshitomo Nakahara, Kentaro Kudo, Takao Nishioka and Hideshi Miura
Influence of Process Residual Stresses on Fatigue Life of High Performance PM Components
Salvator Nigarura, Rajesh Parameswaran, Eric Riley, Michael Bird
Effect of Alloying on Sinter-Hardening Response of Astaloy Mo and Its Diffusion Bonded Derivatives
Sepehr Hatami, Seshendra Karamchedu, Lars Nyborg, Michael Andersson
Microstructural Investigation of Bainitic Steels Obtained by SiC Addition to Low Cr and Mo Ferrous Powders
C.Menapace, G.Simiema, I.Lonardelli, P.Muterlle, A.Molinari
Newly Developed Lean Sinter-Hardening Cr-Mo-Ni PM Steels
S. Saccarola, A. Karuppannagounder,S. Sainz & F. Castro
Low Cost Solutions for High Performance PM Parts
Peter Sokolowski, Narsi Chandrachud, Kalathur Narasimhan
Studies of Bronze Addition Effects to Partially Alloyed Iron Based Powder
J. Karwan-Baczewska, Z. Brytan , M. Actis Grande, M. Rosso
Comparison – by Nanoindentation – Among PM Steels Obtained from Diffusion-Bonded Powders (Nominally Equivalent)
G. F. Bocchini, G. Poli, R. Sola, P. Veronesi
Metallographic Investigation of Nitride Formation During Sintering of Cr-Mo-C-Steels in Nitrogen
Susanne Strobl, Magdalena Dlapka
High Performance Sinterhardened PM Steels
G. Kalss, G. Stetina
Influence of Mn and Ni on the Mechanical Properties of Newly Developed PM Steels
W. García, S. Sainz and F. Castro
Improvement of Strength Properties of Fe-Cr-Mo-[Cu-Ni]-C Sintered Steels by Sinter-Hardening
Eva Dudrová, Marco Actis Grande, Mario Rosso, Margita Kabátová, Eduard Hryha, Róbert Bidulský
Sintered Steels Alloyed with Manganese: Effect of Alloying Mod
E. Hryha, L. Nyborg, E. Dudrova, S. Bengtsson
Sliding Wear of Fe (Cr -Mo) - [0-2% Cu] – 0.65% C Sintered Steels
Róbert Bidulský, Marco Actis Grande
Microstructure and Properties of Cr-Mn Structural Steels Sintered in a Microatmosphere
Maciej Sulowski, Andrzej Cias
The Effect of Manganese on Microstructure Development and Diffusion Characteristics in Admixed Fe-Mn-C Sintered Steels
Róbert Bidulský, Marco Actis Grande, Eduard Hryha, Jana Bidulská
Mechanical Performance of Sinter Hardened Astaloy CrM Emphasizing Wear
Kaveh Sheikhi Moghaddam, Naghi Solimanjad, Anders Bergmark, Pernilla Johanson
Nitrogen Alloying of PM Steels: Processing and Properties
Chris Schade, Tom Murphy, Alan Lawley & Roger Doherty
High Performance Materials for Sinter Hardening Applicaions
Ulf Engström, Sigurd Berg, Robert Frykholm,Christophe Szabo
Applications and Performance of Cr Alloyed PM Steel Parts
Andreas Zeller, Klaus Dollmeier, Lars Wimbert, Michael Marucci and Bruce Lindsley
PM Steels that Contain Manganese
Bruce Lindsley and W. Brian James
The Influence of Compacting Pressure and Granulation on the Porosity of Pieces Reinforced with Steel Yarns
Anca Didu, Marin Didu, Mariana Ciobanu, Stefan Radu
New Alloy Designed For Heat Treated Applications
R. Frykholm and S. Bengtsson
Modelling of the Influence of Admixing and Prealloying on the Optimization of Compressibility and Hardenability of Sinter-Hardenable Steel Powders
Dr. Nicolas Giguere and Prof. Carl Blais
Microstructure and Fracture Behavior of High Strength Hybrid Powder Systems Based on Fe-[Mo]-C + Cr-Ni-Mo-Mn Master Alloy
P. Shykula, R. Oro, E. Dudrova, M. Campos, J.M. Torralba, S. Bengtsson
Properties of Sintered Compacts Made of Ni-Free Pre-Mixed Powder Based on Low Mo Prealloyed Steel Powder
Shigeru UNAMI, Yukiko OZAKI and Tomoshige ONO
Strain Hardenability of Metastable 17-4PH Stainless Steel Produced by Selective Laser Melting
N. Vicente Jr., I. Lonardelli, M. Magalini, A. Molinari
Development of Powder Metallurgy Nickel Free High Nitrogen Stainless Steels
C.Kuang, X.Wang, C.Jia, H.Zhong, X.Kuang, Z.Xu
Linking Pore Size And Structure To The Fatigue Performance of Sintered Steels
Michael Andersson and Mats Larsson
Influence Of Chemistry On RCF Without Slip
T. Janitzky, P. Beiss, C. Broeckmann
Comparison of Rolling Contact Fatigue of Two HVOF-Sprayed Cr3C2-NiCr Hardmetal Coatings
Berger, L.-M.; Lipp K.; Spatzier, J. and Naumann, T.
Material and Process Optimization to Maximize Contact Resistance for High Performance Components
A De Nicolo, W. Pahl
Analysis and Durability Test of Surface Rolled 1P1S 1.5Cr-0.2Mo Very High Density Gear, Teruie TAKEMASU, Takao KOIDE, Yoshinobu TAKEDA, Senad DIZDAR, Toshinaka SHINBUTSU
PM Gear Testing, Fritz Klocke, Christof Gorgels, Eva Gräser, Philipp Kauffmann, Timo Zundel, Gerd Kotthoff, Frank Wattenberg
Surface Modification of PM Gearlever, Sophie Caddeo Johansson, Karin Frisk, Åsa Gustafson, Leif Malmberg, Sven
Bengtsson, Lars Nyborg
Modelling and Prediction of Fatigue Properties of Tool Steels Based on Defects, Geometry and Surface Condition, Sven Haglund,Odd Sandberg, Jens Grønbæk,
Fatigue Assessment of Laserbeam Welded PM Steel Components by the Notch Stress Approach, J. Baumgartner,
R. Waterkotte, C. M. Sonsino
Relevance of Highly Stressed Volume for the Fatigue Design of Sin-tered Components, K. Lipp, P. Beiss, D. Hofferberth, A. Zafari
Reliable Component Fatigue Design Applying Appropriate Cyclic Properties, D. Amos, P. Delarbre, K. Lipp, H. Kaufmann
Austenitic Stainless Steels with Enhanced Mechanical Strength, Prasan Samal and Joseph Pannell, Ulf Engstrom, and Owe Mars
New Material Concept for Advanced Powder Forged Connecting Rods, Ian W. Donaldson, Timothy E. Geiman, Raymond K. Williams and Brandon A. Nichols
Effect of the Microstructure on the Fatigue Strength of Highly Densified Sintered Steel, Nobuhiko Matsumoto, Toshitake Miyake, Mikio Kondoh and Kimihiko And
Sintered Steels Prealloyed with Manganese – Chances and Risks, H.Danninger, M.Jaliliziyaeian, C.Gierl, E.Hryha, S.Bengtsson
Fatigue Behaviour of Fe-Cu-C Sintered Steels as a Function of Stress Concentration and Alloying Contents, A. Zafari, P. Beiss, C. Broeckmann
Cyclic Material Behaviour of a 4%Ni Diffusion-Alloyed and a 1.5%Mo Prealloyed Sintered Steel, R. Wagener, K. Lipp, H. Kaufmann
Effect of Microstructure on the Rolling Contact Fatigue Strength of 4600 Steel P/M Compacts, Terukazu Tokuoka, Yoshitomo Nakahara, Kentaro Kudo, Takao Nishioka and Hideshi Miura
Influence of Process Residual Stresses on Fatigue Life of High Performance PM Components, Salvator Nigarura,
Rajesh Parameswaran, Eric Riley, Michael Bird
Effect of Alloying on Sinter-Hardening Response of Astaloy Mo and Its Diffusion Bonded Derivatives, Sepehr Hatami, Seshendra Karamchedu, Lars Nyborg, Michael Andersson
Microstructural Investigation of Bainitic Steels Obtained by SiC Addition to Low Cr and Mo Ferrous Powders, C.Menapace, G.Simiema, I.Lonardelli, P.Muterlle, A.Molinari
Newly Developed Lean Sinter-Hardening Cr-Mo-Ni PM Steels, S. Saccarola, A. Karuppannagounder,S. Sainz & F. Castro
Low Cost Solutions for High Performance PM Parts, Peter Sokolowski, Narsi Chandrachud, Kalathur Narasimhan
Studies of Bronze Addition Effects to Partially Alloyed Iron Based Powder, J. Karwan-Baczewska, Z. Brytan , M. Actis Grande, M. Rosso
Comparison – by Nanoindentation – Among PM Steels Obtained from Diffusion-Bonded Powders (Nominally Equivalent), G. F. Bocchini, G. Poli, R. Sola, P. Veronesi
Metallographic Investigation of Nitride Formation During Sintering of Cr-Mo-C-Steels in Nitrogen, Susanne Strobl, Magdalena Dlapka
High Performance Sinterhardened PM Steels, G. Kalss, G. Stetina
Influence of Mn and Ni on the Mechanical Properties of Newly Developed PM Steels, W. García, S. Sainz and F. Castro
Improvement of Strength Properties of Fe-Cr-Mo-[Cu-Ni]-C Sintered Steels by Sinter-Hardening, Eva Dudrová, Marco Actis Grande, Mario Rosso, Margita Kabátová, Eduard Hryha, Róbert Bidulský
Sintered Steels Alloyed with Manganese: Effect of Alloying Mode, E. Hryha, L. Nyborg, E. Dudrova, S. Bengtsson
Sliding Wear of Fe (Cr -Mo) - [0-2% Cu] – 0.65% C Sintered Steels, Róbert Bidulský, Marco Actis Grande
Microstructure and Properties of Cr-Mn Structural Steels Sintered in a Microatmosphere, Maciej Sulowski, Andrzej Cias
The Effect of Manganese on Microstructure Development and Diffusion Characteristics in Admixed Fe-Mn-C Sintered Steels, Róbert Bidulský, Marco Actis Grande, Eduard Hryha, Jana Bidulská
Mechanical Performance of Sinter Hardened Astaloy CrM Emphasizing Wear, Kaveh Sheikhi Moghaddam, Naghi Solimanjad, Anders Bergmark, Pernilla Johanson
Nitrogen Alloying of PM Steels: Processing and Properties, Chris Schade, Tom Murphy, Alan Lawley & Roger Doherty
High Performance Materials for Sinter Hardening Applicaions, Ulf Engström, Sigurd Berg, Robert Frykholm,Christophe Szabo
Applications and Performance of Cr Alloyed PM Steel Parts, Andreas Zeller, Klaus Dollmeier, Lars Wimbert, Michael Marucci and Bruce Lindsley
PM Steels that Contain Manganese, Bruce Lindsley and W. Brian James
The Influence of Compacting Pressure and Granulation on the Porosity of Pieces Reinforced with Steel Yarns, Anca Didu, Marin Didu, Mariana Ciobanu, Stefan Radu
New Alloy Designed For Heat Treated Applications, R. Frykholm and S. Bengtsson
Modelling of the Influence of Admixing and Prealloying on the Optimization of Compressibility and Hardenability of Sinter-Hardenable Steel Powders, Dr. Nicolas Giguere and Prof. Carl Blais
Microstructure and Fracture Behavior of High Strength Hybrid Powder Systems Based on Fe-[Mo]-C + Cr-Ni-Mo-Mn Master Alloy, P. Shykula, R. Oro, E. Dudrova, M. Campos, J.M. Torralba, S. Bengtsson
Properties of Sintered Compacts Made of Ni-Free Pre-Mixed Powder Based on Low Mo Prealloyed Steel Powder, Shigeru UNAMI, Yukiko OZAKI and Tomoshige ONO
Strain Hardenability of Metastable 17-4PH Stainless Steel Produced by Selective Laser Melting, N. Vicente Jr.,
I. Lonardelli, M. Magalini, A. Molinari
Development of Powder Metallurgy Nickel Free High Nitrogen Stainless Steels, C.Kuang, X.Wang, C.Jia, H.Zhong, X.Kuang, Z.Xu
Linking Pore Size And Structure To The Fatigue Performance of Sintered Steels, Michael Andersson and Mats Larsson
Influence Of Chemistry On RCF Without Slip, T. Janitzky, P. Beiss, C. Broeckmann
Comparison of Rolling Contact Fatigue of Two HVOF-Sprayed Cr3C2-NiCr Hardmetal Coatings, Berger, L.-M.;
Lipp K.; Spatzier, J. and Naumann, T.
Material and Process Optimization to Maximize Contact Resistance for High Performance Components, A De Nicolo, W. Pahl