Subscribe to the EPMA Mailing List


Company Logo
  • Share this page:
Benefit: Improved Performance, Increased Component Complexity
Main Forming Process: Metal Injection Moulding
End Use Sector: Automotive

Production Volume per annum: 13000+


The Cover is a complicated part, not only from shape point of view, but also because of customer/consumer aesthetic demands. The part has to be visually good-looking. No visual marks should occur. Made on complex MIM tool with ejection packet fixed on half of the mold.

Component Specification

Density (g/cm3): 7.65
Tensile Strength (MPa): 800
Yield Strength (MPa): 660
Elongation (% strain): >3
Hardness (HRC): 32

The information contained in these case studies is provided by third parties and although EPMA does its best to ensure the case studies are accurate it is not liable for any mistakes or wrong information

Go To Top