Helical Gear Wheel

Company Logo
Schunk Sinter Metals
  • Share this page:
Helical Gear Wheel
Benefit: Improved Performance, Increased Component Complexity
Main Forming Process: Conventional Processing
End Use Sector: Automotive
Material: Ferrous

Description

The helical gear wheel with toothing of >4.0° helix angle is used in a mechanical gear unit in an electric parking break and is, therefore, a security-relevant part. The mechanicaltribological demands placed on the component or on the entire subassembly are fulfilled by the helical gear wheel through geometry, material used and finishing treatment within a fully linked process with completely automated steps with pick & place robot loading and 100% acoustical resonance inspection.

Component Specification

Density (g/cm3): 6.60-6.95
Tensile Strength (MPa): >700
Yield Strength (MPa): >600
Elongation (% strain): >50 / >2

The information contained in these case studies is provided by third parties and although EPMA does its best to ensure the case studies are accurate it is not liable for any mistakes or wrong information

Go To Top