Synchroniser Hub

Company Logo
PMG F├╝ssen GmbH
  • Share this page:
Synchroniser Hub
Benefit: Cost Saving
Main Forming Process: Conventional Processing
End Use Sector: Automotive
Material: Ferrous

Finishing: Annealing, Machining, Brushing


This part is unusually large compared to typical synchronizer hubs. This part is designed and manufactured for high torque applications using a press and sinter process without secondary hardening (sinter hardening material) and very little machining.


Conventional synchroniser hubs have their splines broached; this expensive process step is not needed with PM technology, thus enabling a cost saving to be passed on to the customer.

Component Specification

Weight (g): 720g
Density (g/cm3): max 6.95
Tensile Strength (MPa): 820MPa
Hardness (): min 330 HV5
Go To Top